AircraftDirectives
MembershipSign inCreate free account
Menu
Airworthiness Directive

AD 2001-01-08 66 FR 4647 Active

Federal Aviation Administration · 14 CFR part 39

FR document
01-1077
Amendment
39-12078
Published
2001-01-18
Effective
2001-02-22
Models covered
1
Last live check
2026-10-03

Printed from https://aircraftdirectives.com/ad/2001-01-08 · AircraftDirectives restates official FAA and manufacturer records; the official sources named on this sheet control. Not an airworthiness determination.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.

Opens your browser's print dialog. Choose “Save as PDF” to export a file. Keyboard: Ctrl+P or Cmd+P.

AD

2001-01-08

FR doc 01-1077 · 66 FR 4647

AD 2001-01-08Published 2001-01-18Effective 2001-02-22

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires inspection for cracking of the mounting brackets of the hydraulic hand pump at the frame attachment flanges, replacement of any cracked bracket with a new bracket, replacement of all bolts and nuts with new bolts and…

Full official abstract

This amendment adopts a new airworthiness directive (AD), applicable to all BAE Systems (Operations) Limited (Jetstream) Model 4101 airplanes, that requires inspection for cracking of the mounting brackets of the hydraulic hand pump at the frame attachment flanges, replacement of any cracked bracket with a new bracket, replacement of all bolts and nuts with new bolts and nuts, and installation of a particular "D" packer. The actions specified by this AD are intended to prevent failure of these brackets, which could result in inability to extend the landing gear in an emergency situation where the main hydraulic system is lost. This action is intended to address the identified unsafe condition.

More directives for British Aerospace Jetstream 41

  1. AD 2009-16-01 Airworthiness Directives; BAE Systems (Operations) Limited (Jetstream) M... 2009-08-05
  2. AD 2009-10-02 Airworthiness Directives; BAE Systems (Operations) Limited (Jetstream) M... 2009-05-07
  3. AD 2009-02-07 Airworthiness Directives; BAE Systems (Operations) Limited (Jetstream) M... 2009-02-26
  4. AD 2008-18-02 Airworthiness Directives; BAE Systems (Operations) Limited (Jetstream) M... 2009-02-20
  5. AD 2008-17-04 Airworthiness Directives; BAE Systems (Operations) Limited (Jetstream) M... 2008-08-19

All British Aerospace Jetstream 41 directives

View on Federal Register (opens in a new tab) View this AD in FAA DRS (opens in a new tab)

Applies to 1 model in our index