AircraftDirectives
MembershipSign inCreate free account
Menu
Airworthiness Directive

AD 2004-06-17 69 FR 16473 Active

Federal Aviation Administration · 14 CFR part 39

Requires repetitive inspections for damage of the horizontal and vertical stabilizer attachment fittings, and corrective action if necessary.

Federal Register (opens in a new tab)FAA DRS (opens in a new tab)

FR document
04-6684
Amendment
39-13543
Published
2004-03-30
Effective
2004-05-04
Models covered
1

Last live check: 2026-10-04

Printed from https://aircraftdirectives.com/ad/2004-06-17 · AircraftDirectives restates official FAA and manufacturer records; the official sources named on this sheet control. Not an airworthiness determination.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.

Opens your browser's print dialog. Choose “Save as PDF” to export a file. Keyboard: Ctrl+P or Cmd+P.

AD

2004-06-17

FR doc 04-6684 · 69 FR 16473

AD 2004-06-17Published 2004-03-30Effective 2004-05-04

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires repetitive inspections for damage of the horizontal and vertical stabilizer attachment fittings, and corrective action if necessary.

Full official abstract

This amendment adopts a new airworthiness directive (AD), applicable to all BAE Systems (Operations) Limited (Jetstream) Model 4101 airplanes, that requires repetitive inspections for damage of the horizontal and vertical stabilizer attachment fittings, and corrective action if necessary. This action is necessary to detect and correct damage of the horizontal and vertical stabilizer attachment fittings, which could result in reduced structural integrity of the horizontal and vertical stabilizers and consequent reduced controllability of the airplane. This action is intended to address the identified unsafe condition.

More directives for British Aerospace Jetstream 41

  1. AD 2009-16-01 Airworthiness Directives; BAE Systems (Operations) Limited (Jetstream) M... Effective 2009-09-09
  2. AD 2009-10-02 Airworthiness Directives; BAE Systems (Operations) Limited (Jetstream) M... Effective 2009-06-11
  3. AD 2009-02-07 Airworthiness Directives; BAE Systems (Operations) Limited (Jetstream) M... Effective 2009-03-13
  4. AD 2008-18-02 Airworthiness Directives; BAE Systems (Operations) Limited (Jetstream) M... Effective 2009-03-27
  5. AD 2008-17-04 Airworthiness Directives; BAE Systems (Operations) Limited (Jetstream) M... Effective 2008-09-23

All British Aerospace Jetstream 41 directives

View on Federal Register (opens in a new tab) View this AD in FAA DRS (opens in a new tab) Print AD packet (opens the full Federal Register document in a new tab)

Applies to 1 model in our index