2006-06-06
FR doc 06-2544 · 71 FR 13533AD 2006-06-06Published 2006-03-16Effective 2006-03-24
Superseded by 2007-10-15 Supersedes 2005-07-01
Supersedence is read from the Federal Register text of the newer AD — the FAA publishes no structured field for it — and names only ADs held in our index.
Requires you to incorporate information into the applicable section of the Airplane Flight Manual (AFM).
1 correction to this AD FAA · 2006-04-05
Correction published 2006-04-05
- Issued by
- Federal Aviation Administration
- Published
- 2006-04-05
- Document
- Federal Register 06-3252 · Final rule; correction
- Corrects
- the version published March 16, 2006 at 71 FR 13533
This document makes a correction to Airworthiness Directive (AD) 2006-06-06, which published in the Federal Register on March 16, 2006 (71 FR 13533), and applies to all The Cessna Aircraft Company (Cessna) Models 208 and 208B airplanes. AD 2006-06-06 requires you to incorporate information into the applicable section of the Airplane Flight Manual (AFM) and Pilots Operating Handbook (POH) and requires installation of placards. Current language in paragraph (f)(3) of AD 2006-06-06 regarding the placard requirement inadvertently states: "You may insert a copy of this AD into the appropriate sections of the POH to comply with this action." This does not meet the intent of the AD. This document corrects that paragraph by removing the language referenced above.
A correction restates part of an AD that was published incorrectly. It is not an additional requirement and it does not change the AD number or its effective date.
Source: Federal Register document 06-3252, retrieved 2026-08-17
Full official abstract
The FAA is adopting a new airworthiness directive (AD) to supersede AD 2005-07-01, which applies to all The Cessna Aircraft Company (Cessna) Models 208 and 208B airplanes. AD 2005-07-01 currently requires you to incorporate information into the applicable section of the Airplane Flight Manual (AFM). This AD is the result of several accidents/incidents with the affected airplanes during operations in icing conditions, FAA evaluation of Cessna flight test data, Cessna issuing AFM revisions, and FAA determining these revisions are necessary for safe operation. Consequently, this AD updates the actions of AD 2005-07-01 that require incorporation of text in the AFM and requires the insertion of new text in the AFM, and the fabrication and installation of placards. We are issuing this AD to assure that the pilot has enough information to prevent loss of control of the airplane while in-flight during icing conditions.