AircraftDirectives
MembershipSign inCreate free account
Menu
Airworthiness Directive

AD 2007-05-19 72 FR 10346 Active

Federal Aviation Administration · 14 CFR part 39

Requires you to replace the rudder actuator arm (manufactured according to drawing No.

Federal Register (opens in a new tab)FAA DRS (opens in a new tab)

FR document
E7-3989
Amendment
39-14980
Published
2007-03-08
Effective
2007-04-12
Models covered
1

Last live check: 2026-08-19

Printed from https://aircraftdirectives.com/ad/2007-05-19 · AircraftDirectives restates official FAA and manufacturer records; the official sources named on this sheet control. Not an airworthiness determination.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.

Opens your browser's print dialog. Choose “Save as PDF” to export a file. Keyboard: Ctrl+P or Cmd+P.

AD

2007-05-19

FR doc E7-3989 · 72 FR 10346

AD 2007-05-19Published 2007-03-08Effective 2007-04-12

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires you to replace the rudder actuator arm (manufactured according to drawing No.

Full official abstract

The FAA adopts a new airworthiness directive (AD) for all Glasflugel Models H 301 "Libelle," H 301B "Libelle," Standard "Libelle," and Standard Libelle-201B sailplanes. This AD requires you to replace the rudder actuator arm (manufactured according to drawing No. 301-45-10) with an improved design rudder actuator arm (manufactured following drawing No. 301-45-13). This AD results from mandatory continuing airworthiness information (MCAI) issued by the airworthiness authority for Germany. We are issuing this AD to detect and correct damage to the rudder actuator arm, which could result in failure of the rudder actuator arm. This failure could result in reduced or loss of rudder control.

More directives for Glasflügel

  1. AD 2020-19-12 Airworthiness Directives; Glasflugel Effective 2020-10-22
  2. AD 2018-21-04 Airworthiness Directives; Glasgflugel Gliders Effective 2018-11-13
  3. AD 2012-15-07 R1 Airworthiness Directives; Glasflugel Gliders Effective 2012-09-25
  4. AD 2012-15-07 Airworthiness Directives; Glasflugel Gliders Effective 2012-09-11
  5. AD 2004-09-02 Airworthiness Directives; Glasflugel-Ing. E. Hanle Model GLASFLUGEL Kest... Effective 2004-06-18

All Glasflügel directives

View on Federal Register (opens in a new tab) View this AD in FAA DRS (opens in a new tab) Print AD packet (opens the full Federal Register document in a new tab)

Applies to 1 model in our index