AircraftDirectives
MembershipSign inCreate free account
Menu
Airworthiness Directive

AD 2008-22-18 73 FR 65507 Active

Federal Aviation Administration · 14 CFR part 39

Requires you to replace the pick-up collar support and nylon screws for the BRS-150 Parachute System.

Federal Register (opens in a new tab)FAA DRS (opens in a new tab)

FR document
E8-25762
Amendment
39-15715
Published
2008-11-04
Effective
2008-12-09
Models covered
1

Last live check: 2026-08-19

Printed from https://aircraftdirectives.com/ad/2008-22-18 · AircraftDirectives restates official FAA and manufacturer records; the official sources named on this sheet control. Not an airworthiness determination.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.

Opens your browser's print dialog. Choose “Save as PDF” to export a file. Keyboard: Ctrl+P or Cmd+P.

AD

2008-22-18

FR doc E8-25762 · 73 FR 65507

AD 2008-22-18Published 2008-11-04Effective 2008-12-09

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires you to replace the pick-up collar support and nylon screws for the BRS-150 Parachute System.

Full official abstract

We are adopting a new airworthiness directive (AD) for certain Cessna Aircraft Company (Cessna) 150 series airplanes with the BRS-150 Parachute System installed via Supplemental Type Certificate (STC) SA64CH. This AD requires you to replace the pick-up collar support and nylon screws for the BRS-150 Parachute System. This AD results from notification by Ballistic Recovery Systems, Inc. (BRS) that the pick-up collar assembly may prematurely move off the launch tube and adversely affect rocket trajectory during deployment. We are issuing this AD to prevent premature separation of the collar. This condition could result in the parachute failing to successfully deploy.

More directives for Cessna 150/152

  1. AD 2009-10-09 R2 Airworthiness Directives; Cessna Aircraft Company Airplanes Effective 2011-09-12
  2. AD 2011-10-09 Airworthiness Directives; Cessna Aircraft Company Models 150, 152, 170, ... Effective 2011-06-17
  3. AD 2009-10-09 R1 Airworthiness Directives; Cessna Aircraft Company 150 and 152 Series Air... Effective 2009-12-11
  4. AD 2009-10-09 Airworthiness Directives; Cessna Aircraft Company 150 and 152 Series Air... Effective 2009-06-17
  5. AD 2004-19-01 Airworthiness Directives; Cessna Aircraft Company 120, 140, 140A, 150, F... Effective 2004-11-01

All Cessna 150/152 directives

View on Federal Register (opens in a new tab) View this AD in FAA DRS (opens in a new tab) Print AD packet (opens the full Federal Register document in a new tab)

Applies to 1 model in our index