Airworthiness Directive

AD 2010-04-05 75 FR 7934 Active

Federal Aviation Administration · 14 CFR part 39

Requires inspections of the bolt holes, reaming holes if necessary, and inspections of steel reinforcement plates and gaskets.

FR document
2010-3113
Amendment
39-16198
Published
2010-02-23
Effective
2010-03-10
Model coverage
1 model if a part is installed

Last live check: 2026-11-15

This page is a reference Record, not an airworthiness or compliance determination. Read the full notice.

AD

2010-04-05

FR doc 2010-3113 · 75 FR 7934

AD 2010-04-05Published 2010-02-23Effective 2010-03-10

Supersedes 2003-12-05

Supersedence is read from the Federal Register text of the newer AD — the FAA publishes no structured field for it — and names only ADs held in our index.

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires inspections of the bolt holes, reaming holes if necessary, and inspections of steel reinforcement plates and gaskets.

Why this AD
Results from 16 reports received of propeller hubs found cracked since AD 2003-12-05 was issued.
Compliance
Repetitive inspection or action, per the Federal Register abstract. The official rule sets the intervals.
Applies to
McCauley Propeller Systems 1A103/TCM Series Propellers
Supersedes
2003-12-05
Full official abstract

The FAA is superseding an existing airworthiness directive (AD) for McCauley Propeller Systems 1A103/TCM series propellers. That AD requires, for certain serial numbers (S/Ns) of McCauley Propeller Systems 1A103/TCM series propellers, initial and repetitive visual and dye penetrant inspections for cracks in the propeller hub, replacement of propellers with cracks that do not meet acceptable limits, and rework of propellers with cracks that meet acceptable limits. This AD requires, for all McCauley Propeller Systems 1A103/TCM series propellers, the same actions but at reduced compliance times. This AD also requires inspections of the bolt holes, reaming holes if necessary, and inspections of steel reinforcement plates and gaskets. This AD results from 16 reports received of propeller hubs found cracked since AD 2003-12-05 was issued. We are issuing this AD to prevent propeller separation due to hub fatigue cracking, which can result in loss of control of the airplane.

Applies if a named part is installed: 1 model in our index

This directive names a part, appliance, propeller or supplemental type certificate rather than these models. It applies to one of them only when the affected item is installed; the official rule says which parts, serial numbers and dates.

Condition: Only with a McCauley 1A103/TCM series propeller installed.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.