Airworthiness Directive

AD 2015-19-07 80 FR 58339 Active

Federal Aviation Administration · 14 CFR part 39

Prompted by revised service information that added engine models to the applicability.

FR document
2015-23617
Amendment
39-18269
Published
2015-09-29
Effective
2015-11-03
Model coverage
4 models if a part is installed

Last live check: 2026-11-15

This page is a reference Record, not an airworthiness or compliance determination. Read the full notice.

AD

2015-19-07

FR doc 2015-23617 · 80 FR 58339

AD 2015-19-07Published 2015-09-29Effective 2015-11-03

Supersedes 2011-26-04

Supersedence is read from the Federal Register text of the newer AD — the FAA publishes no structured field for it — and names only ADs held in our index.

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Prompted by revised service information that added engine models to the applicability.

Why this AD
Prompted by revised service information that added engine models to the applicability.
Applies to
Lycoming Engines Fuel Injected Reciprocating Engines
Supersedes
2011-26-04
Full official abstract

We are superseding airworthiness directive (AD) 2011-26-04 for certain fuel injected reciprocating engines manufactured by Lycoming Engines. AD 2011-26-04 required inspection, replacement if necessary, and proper clamping of externally mounted fuel injector fuel lines. This new AD retains the requirements of AD 2011-26-04, and expands the list of affected engine models. This AD was prompted by revised service information that added engine models to the applicability. We are issuing this AD to prevent failure of the fuel injector fuel lines, which could lead to uncontrolled engine fire, engine damage, and damage to the airplane.

Applies if a named part is installed: 4 models in our index

This directive names a part, appliance, propeller or supplemental type certificate rather than these models. It applies to one of them only when the affected item is installed; the official rule says which parts, serial numbers and dates.

Condition: Only fuel-injected engines with externally mounted fuel injector fuel lines (models in the AD's Table 1).

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.