Airworthiness Directive

AD 2016-25-25 82 FR 7 Active

Federal Aviation Administration · 14 CFR part 39

FR document
2016-30412
Amendment
39-18751
Published
2017-01-03
Effective
2017-02-07
Models covered
1

Last live check: 2026-11-15

This page is a reference Record, not an airworthiness or compliance determination. Read the full notice.

AD

2016-25-25

FR doc 2016-30412 · 82 FR 7

AD 2016-25-25Published 2017-01-03Effective 2017-02-07

Supersedes 2012-11-15

Supersedence is read from the Federal Register text of the newer AD — the FAA publishes no structured field for it — and names only ADs held in our index.

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires repetitive detailed inspections, and repair if necessary.

Why this AD
Prompted by new reports of cracking found in the wing rear spar and technical analysis results, which confirmed that the crack initiation and propagation are due to fatigue, with no indication of any other crack initiation mechanism (e.g., stress corrosion).
Compliance
Repetitive inspection or action, per the Federal Register abstract. The official rule sets the intervals.
Applies to
BAE Systems (Operations) Limited Airplanes · 1 model in our index, listed below
Supersedes
2012-11-15
Corrections
1 correction notice on file, attached below
1 correction to this AD FAA · 2017-03-22

Correction published 2017-03-22

Issued by
Federal Aviation Administration
Published
2017-03-22
Document
Federal Register 2017-05163 · Final rule; correction

The FAA is correcting an airworthiness directive (AD) that published in the Federal Register. That AD applies to all BAE Systems (Operations) Limited Model 4101 airplanes. As published, the Product Identification line of the regulatory text contains an error. This document corrects that error. In all other respects, the original document remains the same.

A correction restates part of an AD that was published incorrectly. It is not an additional requirement and it does not change the AD number or its effective date.

Source: Federal Register document 2017-05163, retrieved 2026-11-06

Full official abstract

We are superseding Airworthiness Directive (AD) 2012-11-15 for all BAE Systems (Operations) Limited Model 4101 airplanes. AD 2012-11- 15 required a one-time detailed inspection for cracks, corrosion, and other defects of the rear face of the wing rear spar, and repair if necessary. This new AD requires repetitive detailed inspections, and repair if necessary. This AD was prompted by new reports of cracking found in the wing rear spar and technical analysis results, which confirmed that the crack initiation and propagation are due to fatigue, with no indication of any other crack initiation mechanism (e.g., stress corrosion). We are issuing this AD to address the unsafe condition on these products.

More directives for British Aerospace Jetstream 41

  1. AD 2025-16-03 Airworthiness Directives; BAE Systems (Operations) Limited Airplanes Effective 2025-09-18
  2. AD 2023-12-22 Airworthiness Directives; BAE Systems (Operations) Limited Airplanes Effective 2023-08-23
  3. AD 2023-02-06 Airworthiness Directives; BAE Systems (Operations) Limited Airplanes Effective 2023-03-14
  4. AD 2022-14-08 Airworthiness Directives; BAE Systems (Operations) Limited Airplanes Effective 2022-08-18
  5. AD 2018-19-24 Airworthiness Directives; BAE Systems (Operations) Limited Airplanes Effective 2018-11-07

All British Aerospace Jetstream 41 directives

Applies to 1 model in our index

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.