AircraftDirectives
MembershipSign inCreate free account
Menu
Airworthiness Directive

AD 2017-17-02 82 FR 39529 Active

Federal Aviation Administration · 14 CFR part 39

FR document
2017-17094
Amendment
39-18992
Published
2017-08-21
Effective
2017-09-25
Models covered
1
Last live check
2026-10-03

Printed from https://aircraftdirectives.com/ad/2017-17-02 · AircraftDirectives restates official FAA and manufacturer records; the official sources named on this sheet control. Not an airworthiness determination.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.

Opens your browser's print dialog. Choose “Save as PDF” to export a file. Keyboard: Ctrl+P or Cmd+P.

AD

2017-17-02

FR doc 2017-17094 · 82 FR 39529

AD 2017-17-02Published 2017-08-21Effective 2017-09-25

Supersedes 2014-20-09

Supersedence is read from the Federal Register text of the newer AD — the FAA publishes no structured field for it — and names only ADs held in our index.

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires removing airplanes from the AD applicability.

Full official abstract

We are superseding Airworthiness Directive (AD) 2014-20-09, which applied to certain Bombardier, Inc., Model DHC-8-400 series airplanes. AD 2014-20-09 required an inspection for missing clamps that are required to provide positive separation between the alternating current (AC) feeder cables and the hydraulic line of the landing gear alternate extension, and related investigative and corrective actions if necessary. This new AD requires removing airplanes from the AD applicability. This AD was prompted by reports of missing clamps that are required to provide positive separation between the AC feeder cables and the hydraulic line of the landing gear alternate extension. We are issuing this AD to address the unsafe condition on these products.

More directives for de Havilland DHC-8 Dash 8

  1. AD 2026-11-06 Airworthiness Directives; De Havilland Aircraft of Canada Limited (Type ... 2026-06-04
  2. AD 2026-08-07 Airworthiness Directives; De Havilland Aircraft of Canada Limited (Type ... 2026-04-29
  3. AD 2025-19-05 Airworthiness Directives; De Havilland Aircraft of Canada Limited (Type ... 2025-09-26
  4. AD 2025-05-06 Airworthiness Directives; De Havilland Aircraft of Canada Limited (Type ... 2025-03-12
  5. AD 2024-22-07 Airworthiness Directives; De Havilland Aircraft of Canada Limited (Type ... 2024-11-26

All de Havilland DHC-8 Dash 8 directives

View on Federal Register (opens in a new tab) View this AD in FAA DRS (opens in a new tab)

Applies to 1 model in our index