AircraftDirectives
MembershipSign inCreate free account
Menu
Airworthiness Directive

AD 95-15-10 60 FR 37820 Active

Federal Aviation Administration · 14 CFR part 39

FR document
95-17708
Amendment
39-9313
Published
1995-07-24
Effective
1995-08-23
Models covered
1
Last live check
2026-10-03

Printed from https://aircraftdirectives.com/ad/95-15-10 · AircraftDirectives restates official FAA and manufacturer records; the official sources named on this sheet control. Not an airworthiness determination.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.

Opens your browser's print dialog. Choose “Save as PDF” to export a file. Keyboard: Ctrl+P or Cmd+P.

AD

95-15-10

FR doc 95-17708 · 60 FR 37820

AD 95-15-10Published 1995-07-24Effective 1995-08-23

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires an inspection to determine if a travel stop (screw) is installed at the flight control assembly, and various follow-on actions.

Full official abstract

This amendment adopts a new airworthiness directive (AD), applicable to certain Jetstream Model 4101 airplanes, that requires an inspection to determine if a travel stop (screw) is installed at the flight control assembly, and various follow-on actions. This amendment is prompted by a report of failure of the travel stop, which allowed the elevator and aileron disconnect handles to rotate within the housing due to migration of the travel stop from its position. The actions specified by this AD are intended to prevent such migration, which could result in the elevator and aileron disconnect system resetting without the use of the reset button; this condition could lead to jamming of the disconnect handles.

More directives for British Aerospace Jetstream 41

  1. AD 2009-16-01 Airworthiness Directives; BAE Systems (Operations) Limited (Jetstream) M... 2009-08-05
  2. AD 2009-10-02 Airworthiness Directives; BAE Systems (Operations) Limited (Jetstream) M... 2009-05-07
  3. AD 2009-02-07 Airworthiness Directives; BAE Systems (Operations) Limited (Jetstream) M... 2009-02-26
  4. AD 2008-18-02 Airworthiness Directives; BAE Systems (Operations) Limited (Jetstream) M... 2009-02-20
  5. AD 2008-17-04 Airworthiness Directives; BAE Systems (Operations) Limited (Jetstream) M... 2008-08-19

All British Aerospace Jetstream 41 directives

View on Federal Register (opens in a new tab) View this AD in FAA DRS (opens in a new tab)

Applies to 1 model in our index