AircraftDirectives
MembershipSign inCreate free account
Menu
Airworthiness Directive

AD 96-12-01 61 FR 28498 Active

Federal Aviation Administration · 14 CFR part 39

Requires replacement of the flexible cables of the power and condition controls of the engines with new flexible cables.

Federal Register (opens in a new tab)FAA DRS (opens in a new tab)

FR document
96-13797
Amendment
39-9643
Published
1996-06-05
Effective
1996-07-10
Models covered
1

Last live check: 2026-10-04

Printed from https://aircraftdirectives.com/ad/96-12-01 · AircraftDirectives restates official FAA and manufacturer records; the official sources named on this sheet control. Not an airworthiness determination.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.

Opens your browser's print dialog. Choose “Save as PDF” to export a file. Keyboard: Ctrl+P or Cmd+P.

AD

96-12-01

FR doc 96-13797 · 61 FR 28498

AD 96-12-01Published 1996-06-05Effective 1996-07-10

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires replacement of the flexible cables of the power and condition controls of the engines with new flexible cables.

Full official abstract

This amendment adopts a new airworthiness directive (AD), applicable to certain Jetstream Model 4101 airplanes, that requires replacement of the flexible cables of the power and condition controls of the engines with new flexible cables. This amendment also requires installation of protective tape on the outside case of these flexible cables, and reidentification of the cables. This amendment is prompted by reports of stiff operation of the power and condition controls of the engines due to heat damage to and moisture contamination of the flexible cable. The actions specified by this AD are intended to prevent heat damage and moisture contamination to the flexible cable, which could result in stiff operation of the power and condition controls and subsequent reduced engine control.

More directives for British Aerospace Jetstream 41

  1. AD 2009-16-01 Airworthiness Directives; BAE Systems (Operations) Limited (Jetstream) M... Effective 2009-09-09
  2. AD 2009-10-02 Airworthiness Directives; BAE Systems (Operations) Limited (Jetstream) M... Effective 2009-06-11
  3. AD 2009-02-07 Airworthiness Directives; BAE Systems (Operations) Limited (Jetstream) M... Effective 2009-03-13
  4. AD 2008-18-02 Airworthiness Directives; BAE Systems (Operations) Limited (Jetstream) M... Effective 2009-03-27
  5. AD 2008-17-04 Airworthiness Directives; BAE Systems (Operations) Limited (Jetstream) M... Effective 2008-09-23

All British Aerospace Jetstream 41 directives

View on Federal Register (opens in a new tab) View this AD in FAA DRS (opens in a new tab) Print AD packet (opens the full Federal Register document in a new tab)

Applies to 1 model in our index