AircraftDirectives
MembershipSign inCreate free account
Menu
Airworthiness Directive

AD 96-13-02 61 FR 30505 Active

Federal Aviation Administration · 14 CFR part 39

FR document
96-15141
Amendment
39-9670
Published
1996-06-17
Effective
1996-08-07
Models covered
1
Last live check
2026-10-03

Printed from https://aircraftdirectives.com/ad/96-13-02 · AircraftDirectives restates official FAA and manufacturer records; the official sources named on this sheet control. Not an airworthiness determination.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.

Opens your browser's print dialog. Choose “Save as PDF” to export a file. Keyboard: Ctrl+P or Cmd+P.

AD

96-13-02

FR doc 96-15141 · 61 FR 30505

AD 96-13-02Published 1996-06-17Effective 1996-08-07

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires repetitively inspecting the spigot housing plate for cracks and corrosion at the wing/fuselage forward attachment sliding joint, replacing any cracked or corroded part, and eventually replacing the spigots and spigot…

Full official abstract

This amendment adopts a new airworthiness directive (AD) that applies to certain Jetstream Aircraft Limited (JAL) Jetstream Model 3201 airplanes. This action requires repetitively inspecting the spigot housing plate for cracks and corrosion at the wing/fuselage forward attachment sliding joint, replacing any cracked or corroded part, and eventually replacing the spigots and spigot housing plate with new parts of improved design. A crack in the spigot housing plate assembly found during fatigue testing of the affected airplanes prompted this action. The actions specified by this AD are intended to prevent structural failure of the wing/fuselage area caused by a cracked or corroded spigot housing assembly.

More directives for British Aerospace Jetstream 31/32

  1. AD 2023-19-05 Airworthiness Directives; British Aerospace (Operations) Limited and Bri... 2023-10-02
  2. AD 2022-12-09 Airworthiness Directives; British Aerospace (Operations) Limited and Bri... 2022-06-16
  3. AD 2022-11-16 Airworthiness Directives; British Aerospace (Operations) Limited and Bri... 2022-06-08
  4. AD 2022-03-18 Airworthiness Directives; British Aerospace (Operations) Limited and Bri... 2022-02-14
  5. AD 2018-02-15 Airworthiness Directives; British Aerospace Regional Aircraft Airplanes 2018-01-29

All British Aerospace Jetstream 31/32 directives

View on Federal Register (opens in a new tab) View this AD in FAA DRS (opens in a new tab)

Applies to 1 model in our index