Airworthiness Directive

AD 96-17-12 61 FR 43307 Active

Federal Aviation Administration · 14 CFR part 39

FR document
96-21375
Amendment
39-9722
Published
1996-08-22
Effective
1996-10-21
Models covered
1
Last live check
2026-10-03
This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.
AD

96-17-12

FR doc 96-21375 · 61 FR 43307

AD 96-17-12Published 1996-08-22Effective 1996-10-21

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires the following on Jetstream Aircraft Limited (JAL) HP137 Mk1, Jetstream series 200, and Jetstream Model 3101 airplanes: repetitively inspecting the nose landing gear (NLG) top cap assembly securing bolts for looseness or…

Full official abstract

This amendment supersedes Airworthiness Directive (AD) 87-07- 01, which currently requires the following on Jetstream Aircraft Limited (JAL) HP137 Mk1, Jetstream series 200, and Jetstream Model 3101 airplanes: repetitively inspecting the nose landing gear (NLG) top cap assembly securing bolts for looseness or cracks, retorquing any loose security bolt, and replacing any cracked security bolt. AD 87-07-01 also provides the option of incorporating an NLG modification as terminating action for the repetitive inspections. A report of cracked and loose bolts found on an airplane with the above-referenced NLG modification prompted this action. This action: retains the repetitive inspections required by AD 87-07-01; increases the AD applicability to include Jetstream Model 3201 airplanes and airplanes that have the NLG top cap assembly modified in accordance with AD 87-07-01; requires replacing two of the NLG top cap assembly securing bolts; and incorporates a new NLG top cap assembly that would eliminate the repetitive inspection requirement of the AD. The actions specified in this AD are intended to prevent failure of the NLG caused by cracked or loose securing bolts, which, if not detected and corrected, could lead to NLG collapse and damage to the airplane.

More directives for British Aerospace Jetstream 31/32

  1. AD 2023-19-05 Airworthiness Directives; British Aerospace (Operations) Limited and Bri... 2023-10-02
  2. AD 2022-12-09 Airworthiness Directives; British Aerospace (Operations) Limited and Bri... 2022-06-16
  3. AD 2022-11-16 Airworthiness Directives; British Aerospace (Operations) Limited and Bri... 2022-06-08
  4. AD 2022-03-18 Airworthiness Directives; British Aerospace (Operations) Limited and Bri... 2022-02-14
  5. AD 2018-02-15 Airworthiness Directives; British Aerospace Regional Aircraft Airplanes 2018-01-29

All British Aerospace Jetstream 31/32 directives

Applies to 1 model in our index