AircraftDirectives
MembershipSign inCreate free account
Menu
Airworthiness Directive

AD 98-24-07 63 FR 64603 Active

Federal Aviation Administration · 14 CFR part 39

Requires repetitively inspecting the rudder pedal for proper alignment, the safety control stop for wear and proper clearance, the rudder cables for elongation, and the rudder pedal footrest for cracks.

Federal Register (opens in a new tab)FAA DRS (opens in a new tab)

FR document
98-31013
Amendment
39-10893
Published
1998-11-23
Effective
1998-12-28
Models covered
1

Last live check: 2026-08-19

Printed from https://aircraftdirectives.com/ad/98-24-07 · AircraftDirectives restates official FAA and manufacturer records; the official sources named on this sheet control. Not an airworthiness determination.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.

Opens your browser's print dialog. Choose “Save as PDF” to export a file. Keyboard: Ctrl+P or Cmd+P.

AD

98-24-07

FR doc 98-31013 · 63 FR 64603

AD 98-24-07Published 1998-11-23Effective 1998-12-28

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires repetitively inspecting the rudder pedal for proper alignment, the safety control stop for wear and proper clearance, the rudder cables for elongation, and the rudder pedal footrest for cracks.

Full official abstract

This amendment adopts a new airworthiness directive (AD) that applies to certain EXTRA Flugzeugbau GmbH (EXTRA) Models EA-300, EA- 300S, and EA-300L airplanes. This AD requires repetitively inspecting the rudder pedal for proper alignment, the safety control stop for wear and proper clearance, the rudder cables for elongation, and the rudder pedal footrest for cracks. This AD also requires correcting or replacing any discrepant part, as applicable. This AD is the result of mandatory continuing airworthiness information (MCAI) issued by the airworthiness authority for Germany. The actions specified by this AD are intended to prevent failure of the rudder pedal footrest caused by overloading the rudder pedal safety control stop, which could result in loss of directional control of the airplane.

More directives for Extra EA-300

  1. AD 2010-04-11 Airworthiness Directives; Extra Flugzeugproduktions- und Vertriebs- GmbH... Effective 2010-03-30
  2. AD 2007-02-11 Airworthiness Directives; EXTRA Flugzeugproduktions-und Vertriebs-GmbH M... Effective 2007-02-28
  3. AD 2005-11-07 Airworthiness Directives; Extra Flugzeugproduktions-und Vertriebs-GmbH M... Effective 2005-07-18
  4. AD 2005-01-17 Airworthiness Directives; EXTRA Flugzeugbau GmbH Model EA-300 and EA-300... Effective 2005-02-28
  5. AD 2003-17-02 Airworthiness Directives; EXTRA Flugzeugbau GmbH Models EA-300/200, EA-3... Effective 2003-10-10

All Extra EA-300 directives

View on Federal Register (opens in a new tab) View this AD in FAA DRS (opens in a new tab) Print AD packet (opens the full Federal Register document in a new tab)

Applies to 1 model in our index