Lycoming IO-720 manufacturer documents

This page is a reference Record, not an airworthiness or compliance determination. Read the full notice.

Records 101–120 of 137, newest issued first: 40 Service Bulletins, 75 Service Instructions and 22 Service Letters in our index.

SISI 1534Service Recommendations for Long-Term Storage of Engines That Use Automotive FuelIssued 2011-01-27
SI

SI 1534

Lycoming Engines

Issued 2011-01-27

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Service Recommendations for Long-Term Storage of Engines That Use Automotive Fuel

Applies to Lycoming IO-390Lycoming IO-580Lycoming IO-720Lycoming O-235Lycoming O-320Lycoming O-360Lycoming O-435Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SISI 1427CLycoming Reciprocating Engine Break-In and Oil ConsumptionIssued 2010-12-29
SI

SI 1427C

Lycoming Engines

Issued 2010-12-29

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SISI 1483AValve Leak Check with Engine Cylinder RemovedIssued 2010-12-21
SI

SI 1483A

Lycoming Engines

Issued 2010-12-21

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SLSL 251Connecting Rod Bolt MarkingIssued 2010-11-23
SL

SL 251

Lycoming Engines

Issued 2010-11-23

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SBSB 398BRecommended Corrective Action for Use of Incorrect FuelIssued 2010-11-22
SB

SB 398B

Lycoming Engines

Issued 2010-11-22

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SBSB 592Engine Inspection after OverboostIssued 2010-09-29
SB

SB 592

Lycoming Engines

Issued 2010-09-29

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SBSB 543COil Filter Converter Plate Gasket ReplacementIssued 2010-09-29
SB

SB 543C

Lycoming Engines

Issued 2010-09-29

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Oil Filter Converter Plate Gasket Replacement

Applies to Lycoming IO-720Lycoming O-320Lycoming O-360Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1453BProcedure to Replace Oil Filter Converter Plate GasketIssued 2010-09-24
SI

SI 1453B

Lycoming Engines

Issued 2010-09-24

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Procedure to Replace Oil Filter Converter Plate Gasket

Applies to Lycoming IO-720Lycoming O-320Lycoming O-360Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SISI 1204DExhaust Flange GasketsIssued 2010-08-26
SI

SI 1204D

Lycoming Engines

Issued 2010-08-26

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SISI 1132BMagneto Drop-OffIssued 2010-06-18
SI

SI 1132B

Lycoming Engines

Issued 2010-06-18

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SISI 1528Aircraft Engine Starter RecommendationsIssued 2009-12-15
SI

SI 1528

Lycoming Engines

Issued 2009-12-15

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SISI 1424AInstallation Procedure for P/N 15B26066 Hydraulic Tappet/Plunger AssembliesIssued 2009-12-15
SI

SI 1424A

Lycoming Engines

Issued 2009-12-15

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Installation Procedure for P/N 15B26066 Hydraulic Tappet/Plunger Assemblies

Applies to Lycoming IO-390Lycoming IO-580Lycoming IO-720Lycoming O-320Lycoming O-360Lycoming O-435Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SBSB 590AUse of Aircraft Boost Pump with Kelly Aerospace 200F Series Fuel PumpsIssued 2009-11-13
SB

SB 590A

Lycoming Engines

Issued 2009-11-13

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Use of Aircraft Boost Pump with Kelly Aerospace 200F Series Fuel Pumps

Applies to Lycoming IO-580Lycoming IO-720Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1267DPiston Pin Plug UsageIssued 2009-08-28
SI

SI 1267D

Lycoming Engines

Issued 2009-08-28

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SLSL 240APart Numbers Identified by Lycoming with -70 or -85 SuffixIssued 2009-05-27
SL

SL 240A

Lycoming Engines

Issued 2009-05-27

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SISI 1492DPiston Pin Plug Wear InspectionIssued 2009-03-20
SI

SI 1492D

Lycoming Engines

Issued 2009-03-20

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SISI 1409CLycoming Engines P/N LW-16702, Oil AdditiveIssued 2009-02-20
SI

SI 1409C

Lycoming Engines

Issued 2009-02-20

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SBSB 581AReprint of Precision Airmotive Mandatory Service Bulletins Nos. PRS-107, Rev. 4 and PEX-1, Rev. 1Issued 2008-11-19
SB

SB 581A

Lycoming Engines

Issued 2008-11-19

Manufacturer document

Manufacturer's own classification: “Mandatory Service Bulletin”. The manufacturer's classification is not an FAA requirement.

Manufacturer document; legal obligations depend on applicable requirements.

Reprint of Precision Airmotive Mandatory Service Bulletins Nos. PRS-107, Rev. 4 and PEX-1, Rev. 1

Applies to Lycoming IO-390Lycoming IO-580Lycoming IO-720Lycoming O-320Lycoming O-360Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SBSB 584BReprint of Mandatory Unison Service Bulletin No. SB3-08AIssued 2008-10-17
SB

SB 584B

Lycoming Engines

Issued 2008-10-17

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SBSB 582AReprint of Precision Airmotive Mandatory Service Bulletin No. MSA-13Issued 2008-10-10
SB

SB 582A

Lycoming Engines

Issued 2008-10-10

Manufacturer document

Manufacturer's own classification: “Mandatory Service Bulletin”. The manufacturer's classification is not an FAA requirement.

Manufacturer document; legal obligations depend on applicable requirements.

Reprint of Precision Airmotive Mandatory Service Bulletin No. MSA-13

Applies to Lycoming IO-390Lycoming IO-580Lycoming IO-720Lycoming O-235Lycoming O-320Lycoming O-360Lycoming O-435Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.