Lycoming IO-720 manufacturer documents

This page is a reference Record, not an airworthiness or compliance determination. Read the full notice.

Records 81–100 of 137, newest issued first: 40 Service Bulletins, 75 Service Instructions and 22 Service Letters in our index.

SLSL 254Lycoming Model Designation for all CarburetorsIssued 2013-04-15
SL

SL 254

Lycoming Engines

Issued 2013-04-15

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SBSB 201FInspection of Crankshaft FlangeIssued 2013-03-26
SB

SB 201F

Lycoming Engines

Issued 2013-03-26

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1546Specific Requirements for Installation and Removal of Electrical Lead on Hartzell Engine Technologies, LLC StartersIssued 2012-10-04
SI

SI 1546

Lycoming Engines

Issued 2012-10-04

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Specific Requirements for Installation and Removal of Electrical Lead on Hartzell Engine Technologies, LLC Starters

Applies to Lycoming IO-390Lycoming IO-580Lycoming IO-720Lycoming O-235Lycoming O-320Lycoming O-360Lycoming O-435Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1549Notification of Approved Fuel Pump Plunger P/N 23D26777Issued 2012-06-27
SI

SI 1549

Lycoming Engines

Issued 2012-06-27

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1256FValve Guides For Service UseIssued 2012-04-05
SI

SI 1256F

Lycoming Engines

Issued 2012-04-05

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SBSB 599Compliance with Hartzell Engine Technologies, LLC Service Bulletin No. 045, 201F Fuel Pump Inspection and RecallIssued 2012-03-14
SB

SB 599

Lycoming Engines

Issued 2012-03-14

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Compliance with Hartzell Engine Technologies, LLC Service Bulletin No. 045, 201F Fuel Pump Inspection and Recall

Applies to Lycoming IO-720Lycoming O-320Lycoming O-360Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1458GConnecting Rod BoltsIssued 2012-03-06
SI

SI 1458G

Lycoming Engines

Issued 2012-03-06

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1414BBendix Service Bulletin No. RS­77, Rev. 2Issued 2012-02-27
SI

SI 1414B

Lycoming Engines

Issued 2012-02-27

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1543Notification of Approved Tappet P/N 15B26262Issued 2012-02-23
SI

SI 1543

Lycoming Engines

Issued 2012-02-23

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1457Optional Remote­Mounted Oil Filter KitsIssued 2012-02-01
SI

SI 1457

Lycoming Engines

Issued 2012-02-01

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SBSB 601Non-Compliant Oil Fill Tubes P/N 77527Issued 2011-11-22
SB

SB 601

Lycoming Engines

Issued 2011-11-22

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Non-Compliant Oil Fill Tubes P/N 77527

Applies to Lycoming IO-720Lycoming O-235Lycoming O-320Lycoming O-360Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1143CCounterweight Bushing Inspection, Replacement, and Special Tooling UpgradesIssued 2011-11-10
SI

SI 1143C

Lycoming Engines

Issued 2011-11-10

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Counterweight Bushing Inspection, Replacement, and Special Tooling Upgrades

Applies to Lycoming IO-390Lycoming IO-580Lycoming IO-720Lycoming O-360Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1535Counterweight and Roller Removal, Inspection, and InstallationIssued 2011-10-31
SI

SI 1535

Lycoming Engines

Issued 2011-10-31

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SLSL 220CWide Deck Cylinder Configuration on Lycoming EnginesIssued 2011-08-02
SL

SL 220C

Lycoming Engines

Issued 2011-08-02

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SLSL 250ALycoming Engines Exchange Engine Core PolicyIssued 2011-07-29
SL

SL 250A

Lycoming Engines

Issued 2011-07-29

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SBSB 595Torque Values for Screws that Attach Ignition Harness Attachment PlateIssued 2011-05-06
SB

SB 595

Lycoming Engines

Issued 2011-05-06

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Torque Values for Screws that Attach Ignition Harness Attachment Plate

Applies to Lycoming IO-390Lycoming IO-580Lycoming IO-720Lycoming O-235Lycoming O-320Lycoming O-360Lycoming O-435Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SBSB 596Reprint of AVStar Mandatory Service Bulletin AFS-SB6 Revision 2Issued 2011-04-27
SB

SB 596

Lycoming Engines

Issued 2011-04-27

Manufacturer document

Manufacturer's own classification: “Mandatory Service Bulletin”. The manufacturer's classification is not an FAA requirement.

Manufacturer document; legal obligations depend on applicable requirements.

Reprint of AVStar Mandatory Service Bulletin AFS-SB6 Revision 2

Applies to Lycoming IO-720Lycoming O-360Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1484CInstallation Torque for Fuel Metering Device, Carburetor, Fuel Injector Servo or "AN" Fuel Pump Hold Down NutsIssued 2011-03-29
SI

SI 1484C

Lycoming Engines

Issued 2011-03-29

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Installation Torque for Fuel Metering Device, Carburetor, Fuel Injector Servo or "AN" Fuel Pump Hold Down Nuts

Applies to Lycoming IO-390Lycoming IO-580Lycoming IO-720Lycoming O-235Lycoming O-320Lycoming O-360Lycoming O-435Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1420AFuel Pump Drive Spline LubricationIssued 2011-02-25
SI

SI 1420A

Lycoming Engines

Issued 2011-02-25

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Fuel Pump Drive Spline Lubrication

Applies to Lycoming IO-720Lycoming O-320Lycoming O-360Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1530Engine Inspection in Particulate-Laden EnvironmentsIssued 2011-02-04
SI

SI 1530

Lycoming Engines

Issued 2011-02-04

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.