Lycoming O-235 manufacturer documents

This page is a reference Record, not an airworthiness or compliance determination. Read the full notice.

Records 101–120 of 124, newest issued first: 36 Service Bulletins, 68 Service Instructions and 20 Service Letters in our index.

SISI 1528Aircraft Engine Starter RecommendationsIssued 2009-12-15
SI

SI 1528

Lycoming Engines

Issued 2009-12-15

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SISI 1246BEngine Conversion For Use of 100/130 or 100LL Grade FuelIssued 2009-12-15
SI

SI 1246B

Lycoming Engines

Issued 2009-12-15

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Engine Conversion For Use of 100/130 or 100LL Grade Fuel

Applies to Lycoming O-235

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SLSL 240APart Numbers Identified by Lycoming with -70 or -85 SuffixIssued 2009-05-27
SL

SL 240A

Lycoming Engines

Issued 2009-05-27

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SISI 1492DPiston Pin Plug Wear InspectionIssued 2009-03-20
SI

SI 1492D

Lycoming Engines

Issued 2009-03-20

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SISI 1409CLycoming Engines P/N LW-16702, Oil AdditiveIssued 2009-02-20
SI

SI 1409C

Lycoming Engines

Issued 2009-02-20

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SBSB 584BReprint of Mandatory Unison Service Bulletin No. SB3-08AIssued 2008-10-17
SB

SB 584B

Lycoming Engines

Issued 2008-10-17

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SBSB 582AReprint of Precision Airmotive Mandatory Service Bulletin No. MSA-13Issued 2008-10-10
SB

SB 582A

Lycoming Engines

Issued 2008-10-10

Manufacturer document

Manufacturer's own classification: “Mandatory Service Bulletin”. The manufacturer's classification is not an FAA requirement.

Manufacturer document; legal obligations depend on applicable requirements.

Reprint of Precision Airmotive Mandatory Service Bulletin No. MSA-13

Applies to Lycoming IO-390Lycoming IO-580Lycoming IO-720Lycoming O-235Lycoming O-320Lycoming O-360Lycoming O-435Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SBSB 583AReprint of Mandatory Unison Service Bulletin No. SB2-08Issued 2008-07-21
SB

SB 583A

Lycoming Engines

Issued 2008-07-21

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SLSL 245Special Service Publication No. SSP-567, "Camshaft Regrinding"Issued 2007-11-02
SL

SL 245

Lycoming Engines

Issued 2007-11-02

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SISI 1148CUse of Carburetor Heat ControlIssued 2007-10-12
SI

SI 1148C

Lycoming Engines

Issued 2007-10-12

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SBSB 576Reprint of Teledyne Continental Ignition Systems Service Bulletin No. SB633AIssued 2007-09-21
SB

SB 576

Lycoming Engines

Issued 2007-09-21

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Reprint of Teledyne Continental Ignition Systems Service Bulletin No. SB633A

Applies to Lycoming O-235Lycoming O-320Lycoming O-360Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SLSL 221CWarranty Repair of Precision Airmotive Corporation Fuel Control ProductsIssued 2007-06-15
SL

SL 221C

Lycoming Engines

Issued 2007-06-15

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Warranty Repair of Precision Airmotive Corporation Fuel Control Products

Applies to Lycoming IO-390Lycoming IO-580Lycoming IO-720Lycoming O-235Lycoming O-320Lycoming O-360Lycoming O-435Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SBSB 572Missing Oil Passage Hole at Idler Shaft LocationIssued 2006-10-30
SB

SB 572

Lycoming Engines

Issued 2006-10-30

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Missing Oil Passage Hole at Idler Shaft Location

Applies to Lycoming O-235

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1105BPeriodic Inspection of Generator/Alternator Mounting BracketsIssued 2006-05-05
SI

SI 1105B

Lycoming Engines

Issued 2006-05-05

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Periodic Inspection of Generator/Alternator Mounting Brackets

Applies to Lycoming O-235Lycoming O-320Lycoming O-360

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SLSL 173CSlick Aircraft Products Service Bulletin No. SB2-80CIssued 2006-03-10
SL

SL 173C

Lycoming Engines

Issued 2006-03-10

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Slick Aircraft Products Service Bulletin No. SB2-80C

Applies to Lycoming IO-390Lycoming IO-580Lycoming O-235Lycoming O-320Lycoming O-360Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SBSB 548ADiaphragm-Type Fuel Pump Inspection/ReplacementIssued 2005-08-31
SB

SB 548A

Lycoming Engines

Issued 2005-08-31

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Diaphragm-Type Fuel Pump Inspection/Replacement

Applies to Lycoming O-235Lycoming O-320Lycoming O-360Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1164BOil Pump ApplicationIssued 2005-04-12
SI

SI 1164B

Lycoming Engines

Issued 2005-04-12

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SBSB 530BApplication of Protective Coating on CrankshaftIssued 2004-11-22
SB

SB 530B

Lycoming Engines

Issued 2004-11-22

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Application of Protective Coating on Crankshaft

Applies to Lycoming O-235Lycoming O-320Lycoming O-360

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SBSB 388CProcedure to Determine Exhaust Valve and Guide ConditionIssued 2004-11-22
SB

SB 388C

Lycoming Engines

Issued 2004-11-22

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1512Main and Connecting Rod Bearing UpgradeIssued 2004-09-23
SI

SI 1512

Lycoming Engines

Issued 2004-09-23

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.