Lycoming O-320 manufacturer documents

This page is a reference Record, not an airworthiness or compliance determination. Read the full notice.

Records 161–172 of 172, newest issued first: 58 Service Bulletins, 91 Service Instructions and 23 Service Letters in our index.

SISI 1511AInspection of "PID" Stamped CrankshaftsIssued 2005-05-26
SI

SI 1511A

Lycoming Engines

Issued 2005-05-26

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Inspection of "PID" Stamped Crankshafts

Applies to Lycoming O-320Lycoming O-360

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SISI 1164BOil Pump ApplicationIssued 2005-04-12
SI

SI 1164B

Lycoming Engines

Issued 2005-04-12

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SBSB 565Diaphragm-Type Fuel Pump Inspection/ReplacementIssued 2005-02-21
SB

SB 565

Lycoming Engines

Issued 2005-02-21

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Diaphragm-Type Fuel Pump Inspection/Replacement

Applies to Lycoming O-320Lycoming O-360Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SBSB 530BApplication of Protective Coating on CrankshaftIssued 2004-11-22
SB

SB 530B

Lycoming Engines

Issued 2004-11-22

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Application of Protective Coating on Crankshaft

Applies to Lycoming O-235Lycoming O-320Lycoming O-360

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SBSB 388CProcedure to Determine Exhaust Valve and Guide ConditionIssued 2004-11-22
SB

SB 388C

Lycoming Engines

Issued 2004-11-22

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1512Main and Connecting Rod Bearing UpgradeIssued 2004-09-23
SI

SI 1512

Lycoming Engines

Issued 2004-09-23

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SBSB 559Reprint of Kelly Aerospace Power Systems Service Bulletin No. A-112, Rev. AIssued 2004-03-23
SB

SB 559

Lycoming Engines

Issued 2004-03-23

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Reprint of Kelly Aerospace Power Systems Service Bulletin No. A-112, Rev. A

Applies to Lycoming O-235Lycoming O-320Lycoming O-360Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1462APropeller Oil Control Leak Test ProcedureIssued 2003-07-10
SI

SI 1462A

Lycoming Engines

Issued 2003-07-10

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Propeller Oil Control Leak Test Procedure

Applies to Lycoming O-235Lycoming O-320Lycoming O-360Lycoming O-435Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SBSB 555AOil Pump Body Plug InspectionIssued 2003-05-16
SB

SB 555A

Lycoming Engines

Issued 2003-05-16

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Oil Pump Body Plug Inspection

Applies to Lycoming IO-720Lycoming O-320Lycoming O-360Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1509Replacement of all P/N STD 1409 Nuts with P/N STD-2249 NutsIssued 2003-04-25
SI

SI 1509

Lycoming Engines

Issued 2003-04-25

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SBSB 475CCrankshaft Gear Modification and Assembly ProceduresIssued 2003-01-30
SB

SB 475C

Lycoming Engines

Issued 2003-01-30

Referenced by AD

AD 2004-10-14 references this bulletin. Read the AD to determine which actions and revision it requires.

Source: Lycoming Engines, retrieved 2026-08-16 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SBSB 505BInspection of Crankshaft I.D. for CorrosionIssued 1997-12-01
SB

SB 505B

Lycoming Engines

Issued 1997-12-01

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Inspection of Crankshaft I.D. for Corrosion

Applies to Lycoming O-320Lycoming O-360

Source: Lycoming Engines, retrieved 2026-08-16 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.