Lycoming O-360 manufacturer documents

This page is a reference Record, not an airworthiness or compliance determination. Read the full notice.

Records 141–160 of 219, newest issued first: 77 Service Bulletins, 116 Service Instructions and 26 Service Letters in our index.

SBSB 595Torque Values for Screws that Attach Ignition Harness Attachment PlateIssued 2011-05-06
SB

SB 595

Lycoming Engines

Issued 2011-05-06

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Torque Values for Screws that Attach Ignition Harness Attachment Plate

Applies to Lycoming IO-390Lycoming IO-580Lycoming IO-720Lycoming O-235Lycoming O-320Lycoming O-360Lycoming O-435Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SBSB 597Fuel Drain Valve Adapter Assembly P/N LW-13807Issued 2011-05-04
SB

SB 597

Lycoming Engines

Issued 2011-05-04

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Fuel Drain Valve Adapter Assembly P/N LW-13807

Applies to Lycoming IO-580Lycoming O-360Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SBSB 596Reprint of AVStar Mandatory Service Bulletin AFS-SB6 Revision 2Issued 2011-04-27
SB

SB 596

Lycoming Engines

Issued 2011-04-27

Manufacturer document

Manufacturer's own classification: “Mandatory Service Bulletin”. The manufacturer's classification is not an FAA requirement.

Manufacturer document; legal obligations depend on applicable requirements.

Reprint of AVStar Mandatory Service Bulletin AFS-SB6 Revision 2

Applies to Lycoming IO-720Lycoming O-360Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1497AEngine Procedures for Flight Training OperationsIssued 2011-04-12
SI

SI 1497A

Lycoming Engines

Issued 2011-04-12

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Engine Procedures for Flight Training Operations

Applies to Lycoming O-360

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1484CInstallation Torque for Fuel Metering Device, Carburetor, Fuel Injector Servo or "AN" Fuel Pump Hold Down NutsIssued 2011-03-29
SI

SI 1484C

Lycoming Engines

Issued 2011-03-29

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Installation Torque for Fuel Metering Device, Carburetor, Fuel Injector Servo or "AN" Fuel Pump Hold Down Nuts

Applies to Lycoming IO-390Lycoming IO-580Lycoming IO-720Lycoming O-235Lycoming O-320Lycoming O-360Lycoming O-435Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1442AImproved Oil Filter Bypass ValveIssued 2011-03-28
SI

SI 1442A

Lycoming Engines

Issued 2011-03-28

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Improved Oil Filter Bypass Valve

Applies to Lycoming O-360Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1489CFuel Manifold Spring ChangeIssued 2011-03-09
SI

SI 1489C

Lycoming Engines

Issued 2011-03-09

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Fuel Manifold Spring Change

Applies to Lycoming O-360

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1420AFuel Pump Drive Spline LubricationIssued 2011-02-25
SI

SI 1420A

Lycoming Engines

Issued 2011-02-25

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Fuel Pump Drive Spline Lubrication

Applies to Lycoming IO-720Lycoming O-320Lycoming O-360Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1508CDual Magneto AttachmentIssued 2011-02-10
SI

SI 1508C

Lycoming Engines

Issued 2011-02-10

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Dual Magneto Attachment

Applies to Lycoming O-360

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SISI 1530Engine Inspection in Particulate-Laden EnvironmentsIssued 2011-02-04
SI

SI 1530

Lycoming Engines

Issued 2011-02-04

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SISI 1534Service Recommendations for Long-Term Storage of Engines That Use Automotive FuelIssued 2011-01-27
SI

SI 1534

Lycoming Engines

Issued 2011-01-27

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Service Recommendations for Long-Term Storage of Engines That Use Automotive Fuel

Applies to Lycoming IO-390Lycoming IO-580Lycoming IO-720Lycoming O-235Lycoming O-320Lycoming O-360Lycoming O-435Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SBSB 594Reprint of Hartzell Engine Technologies LLC Mandatory Service Bulletin 040AIssued 2011-01-10
SB

SB 594

Lycoming Engines

Issued 2011-01-10

Manufacturer document

Manufacturer's own classification: “Mandatory Service Bulletin”. The manufacturer's classification is not an FAA requirement.

Manufacturer document; legal obligations depend on applicable requirements.

Reprint of Hartzell Engine Technologies LLC Mandatory Service Bulletin 040A

Applies to Lycoming O-360Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1427CLycoming Reciprocating Engine Break-In and Oil ConsumptionIssued 2010-12-29
SI

SI 1427C

Lycoming Engines

Issued 2010-12-29

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SISI 1483AValve Leak Check with Engine Cylinder RemovedIssued 2010-12-21
SI

SI 1483A

Lycoming Engines

Issued 2010-12-21

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SLSL 251Connecting Rod Bolt MarkingIssued 2010-11-23
SL

SL 251

Lycoming Engines

Issued 2010-11-23

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SBSB 398BRecommended Corrective Action for Use of Incorrect FuelIssued 2010-11-22
SB

SB 398B

Lycoming Engines

Issued 2010-11-22

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1436AAdapter Kit for Magneto Isolation DriveIssued 2010-09-29
SI

SI 1436A

Lycoming Engines

Issued 2010-09-29

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Adapter Kit for Magneto Isolation Drive

Applies to Lycoming O-360

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SBSB 592Engine Inspection after OverboostIssued 2010-09-29
SB

SB 592

Lycoming Engines

Issued 2010-09-29

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SBSB 543COil Filter Converter Plate Gasket ReplacementIssued 2010-09-29
SB

SB 543C

Lycoming Engines

Issued 2010-09-29

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Oil Filter Converter Plate Gasket Replacement

Applies to Lycoming IO-720Lycoming O-320Lycoming O-360Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1453BProcedure to Replace Oil Filter Converter Plate GasketIssued 2010-09-24
SI

SI 1453B

Lycoming Engines

Issued 2010-09-24

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Procedure to Replace Oil Filter Converter Plate Gasket

Applies to Lycoming IO-720Lycoming O-320Lycoming O-360Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.