Airworthiness Directive

AD 2000-01-16 65 FR 2844 Active

Federal Aviation Administration · 14 CFR part 39

FR document
00-951
Amendment
39-11514
Published
2000-01-19
Effective
2000-02-15
Models covered
9
Last live check
2026-10-01
This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.
AD

2000-01-16

FR doc 00-951 · 65 FR 2844

AD 2000-01-16Published 2000-01-19Effective 2000-02-15

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires repetitively inspecting and replacing or repairing the exhaust system on certain Cessna Aircraft Company (Cessna) 300 and 400 series airplanes.

Full official abstract

This amendment supersedes Airworthiness Directive (AD) 75-23- 08 R5, which currently requires repetitively inspecting and replacing or repairing the exhaust system on certain Cessna Aircraft Company (Cessna) 300 and 400 series airplanes. The requirements of this AD replace the inspections and replacements that are required by AD 75-23- 08 R5 with inspections and replacements containing new simplified procedures for all 300 and 400 series airplanes (models affected by the current AD plus additional models). This AD also revises the inspection intervals and requires replacing certain unserviceable parts and removing the exhaust system for a detailed inspection. This AD is the result of numerous incidents and accidents relating to the exhaust systems on Cessna 300 and 400 series airplanes dating from the middle 1970's to the present, including six incidents since issuance of AD 75- 23-08 R5 where exhaust problems were cited. The actions specified by this AD are intended to detect and correct cracks and corrosion in the exhaust system, which could result in exhaust system failure and a possible uncontrollable in-flight fire with pilot and/or passenger injury.

More directives for Cessna 303 Crusader

  1. AD 2011-10-09 Airworthiness Directives; Cessna Aircraft Company Models 150, 152, 170, ... 2011-05-13
  2. AD 2008-26-10 Airworthiness Directives; Cessna Aircraft Company 172, 175, 177, 180, 18... 2008-12-24
  3. AD 2008-10-02 Airworthiness Directives; Cessna Aircraft Company 172, 175, 180, 182, 18... 2008-05-02
  4. AD 98-04-28 Airworthiness Directives; Cessna Aircraft Company Models T303, 310R, T31... 1998-02-17
  5. AD 95-09-13 Airworthiness Directives; Cessna Aircraft Company Models T303, 402C, 404... 1995-05-08

All Cessna 303 Crusader directives

Applies to 9 models in our index