Cessna 404 Titan

Airworthiness Directives; The Cessna Aircraft Company Models 401, 401A, 401B, 402, 402A, 402B, 402C, 404, 411, 411A, 414, 414A, 421, 421A, 421B, 421C, 425, and 441 Airplanes

The FAA adopts a new airworthiness directive (AD) for certain The Cessna Aircraft Company (Cessna) Models 401, 401A, 401B, 402, 402A, 402B, 402C, 404, 411, 411A, 414, 414A, 421, 421A, 421B, 421C, 425, and 441 airplanes equipped with certain avionics bus circuit breaker switches. This AD requires you to inspect the avionics bus circuit breaker switch to determine the date code and replace any without a date code. This AD also imposes a 1,000-hour safe life limit on avionics bus circuit breaker switches with a date code earlier than 0434. This AD results from reports of smoke and a burning smell in the cockpit. We are issuing this AD to prevent failure of the avionics bus circuit breaker switch, which could result in smoke and a burning smell in the cockpit. This failure could lead to reduced ability to control the airplane.

Airworthiness Directives; Cessna Aircraft Company 300 and 400 Series Airplanes

This amendment supersedes Airworthiness Directive (AD) 75-23- 08 R5, which currently requires repetitively inspecting and replacing or repairing the exhaust system on certain Cessna Aircraft Company (Cessna) 300 and 400 series airplanes. The requirements of this AD replace the inspections and replacements that are required by AD 75-23- 08 R5 with inspections and replacements containing new simplified procedures for all 300 and 400 series airplanes (models affected by the current AD plus additional models). This AD also revises the inspection intervals and requires replacing certain unserviceable parts and removing the exhaust system for a detailed inspection. This AD is the result of numerous incidents and accidents relating to the exhaust systems on Cessna 300 and 400 series airplanes dating from the middle 1970's to the present, including six incidents since issuance of AD 75- 23-08 R5 where exhaust problems were cited. The actions specified by this AD are intended to detect and correct cracks and corrosion in the exhaust system, which could result in exhaust system failure and a possible uncontrollable in-flight fire with pilot and/or passenger injury.

Airworthiness Directives; Cessna Aircraft Company Models T303, 310R, T310R, 335, 340A, 402B, 402C, 404, F406, 414, 414A, 421B, 421C, 425, and 441 Airplanes

This amendment adopts a new airworthiness directive (AD) that applies to Cessna Aircraft Company Models T303, 310R, T310R, 335, 340A, 402B, 402C, 404, F406, 414, 414A, 421B, 421C, 425, and 441 airplanes. This action requires revising the FAA-approved Airplane Flight Manual (AFM) to specify procedures that would prohibit flight in severe icing conditions (as determined by certain visual cues), limit or prohibit the use of various flight control devices while in severe icing conditions, and provide the flight crew with recognition cues for, and procedures for exiting from, severe icing conditions. The proposed AD is prompted by the results of a review of the requirements for certification of these airplanes in icing conditions, new information on the icing environment, and icing data provided currently to the flight crew. The actions specified by this AD are intended to minimize the potential hazards associated with operating these airplanes in severe icing conditions by providing more clearly defined procedures and limitations associated with such conditions.

Airworthiness Directives; Cessna Aircraft Company Models T303, 402C, 404, 414A, and 421C Airplanes

This amendment supersedes AD 93-05-03, which currently requires repetitively inspecting each fuel inlet float valve in accordance with certain test procedures on Cessna Aircraft Company (Cessna) Models T303, 402C, 404, 414A, and 421C airplanes, and replacing any valve that does not pass this test. The manufacturer has developed fuel inlet float valves of improved design, and the Federal Aviation Administration (FAA) has determined that the improved valves should be installed to reduce the number of repetitive tests currently required by AD 93-05-03. This action requires installing these fuel inlet float valves of improved design. The actions specified by this AD are intended to prevent possible loss of engine power caused by failure of a fuel inlet float valve.