AircraftDirectives
MembershipSign inCreate free account
Menu
Airworthiness Directive

AD 2022-12-06 87 FR 35892 Active

Federal Aviation Administration · 14 CFR part 39

Requires repetitively inspecting the trim tab trailing edge to determine if free play exists and taking corrective actions as needed.

Federal Register (opens in a new tab)FAA DRS (opens in a new tab)

FR document
2022-12762
Amendment
39-22078
Published
2022-06-14
Effective
2022-07-19
Models covered
1

Last live check: 2026-08-19

Printed from https://aircraftdirectives.com/ad/2022-12-06 · AircraftDirectives restates official FAA and manufacturer records; the official sources named on this sheet control. Not an airworthiness determination.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.

Opens your browser's print dialog. Choose “Save as PDF” to export a file. Keyboard: Ctrl+P or Cmd+P.

AD

2022-12-06

FR doc 2022-12762 · 87 FR 35892

AD 2022-12-06Published 2022-06-14Effective 2022-07-19

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires repetitively inspecting the trim tab trailing edge to determine if free play exists and taking corrective actions as needed.

Full official abstract

The FAA is adopting a new airworthiness directive (AD) for certain Costruzioni Aeronautiche Tecnam S.P.A. Model P2012 Traveller airplanes. This AD was prompted by mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as free play in the trim tab actuator and trim tab surface. This AD requires repetitively inspecting the trim tab trailing edge to determine if free play exists and taking corrective actions as needed. The FAA is issuing this AD to address the unsafe condition on these products.

More directives for Tecnam

  1. AD 2026-19-06 Airworthiness Directives; Costruzioni Aeronautiche Tecnam S.P.A. Airplan... Effective 2026-10-13
  2. AD 2026-07-05 Airworthiness Directives; Costruzioni Aeronautiche Tecnam S.P.A. Airplan... Effective 2026-04-20
  3. AD 2025-17-13 Airworthiness Directives; Costruzioni Aeronautiche Tecnam S.p.A. Airplan... Effective 2025-09-26
  4. AD 2025-03-09 Airworthiness Directives; Costruzioni Aeronautiche Tecnam S.P.A Airplane... Effective 2025-03-03
  5. AD 2022-19-11 Airworthiness Directives; Costruzioni Aeronautiche Tecnam S.P.A. Airplan... Effective 2022-09-30

All Tecnam directives

View on Federal Register (opens in a new tab) View this AD in FAA DRS (opens in a new tab) Print AD packet (opens the full Federal Register document in a new tab)

Applies to 1 model in our index