Airworthiness Directive

AD 2025-03-09 90 FR 9599 Active

Federal Aviation Administration · 14 CFR part 39

Requires modifying the airplane by installing larger diameter retainer washers on both the left-hand (LH) and right-hand (RH) rudder pedals torque tube hinges, installing new self-locking nuts, doing a functional or operating…

FR document
2025-02638
Amendment
39-22957
Published
2025-02-14
Effective
2025-03-03
Models covered
1

Last live check: 2026-08-19

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.
AD

2025-03-09

FR doc 2025-02638 · 90 FR 9599

AD 2025-03-09Published 2025-02-14Effective 2025-03-03

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires modifying the airplane by installing larger diameter retainer washers on both the left-hand (LH) and right-hand (RH) rudder pedals torque tube hinges, installing new self-locking nuts, doing a functional or operating test of the system to ensure the retaining washers are installed properly, and applying a torque stripe on the LH and RH nuts and bolts threads.

Full official abstract

The FAA is adopting a new airworthiness directive (AD) for certain Costruzioni Aeronautiche Tecnam S.P.A. (Tecnam) Model P2010 and P2010 TDI airplanes. This AD was prompted by the disconnection of a rudder pedals torque tube from one of its hinges. This AD requires modifying the airplane by installing larger diameter retainer washers on both the left-hand (LH) and right-hand (RH) rudder pedals torque tube hinges, installing new self-locking nuts, doing a functional or operating test of the system to ensure the retaining washers are installed properly, and applying a torque stripe on the LH and RH nuts and bolts threads. The FAA is issuing this AD to address the unsafe condition on these products.

More directives for Tecnam

  1. AD 2026-19-06 Airworthiness Directives; Costruzioni Aeronautiche Tecnam S.P.A. Airplan... Effective 2026-10-13
  2. AD 2026-07-05 Airworthiness Directives; Costruzioni Aeronautiche Tecnam S.P.A. Airplan... Effective 2026-04-20
  3. AD 2025-17-13 Airworthiness Directives; Costruzioni Aeronautiche Tecnam S.p.A. Airplan... Effective 2025-09-26
  4. AD 2022-19-11 Airworthiness Directives; Costruzioni Aeronautiche Tecnam S.P.A. Airplan... Effective 2022-09-30
  5. AD 2022-12-06 Airworthiness Directives; Costruzioni Aeronautiche Tecnam S.P.A. Airplan... Effective 2022-07-19

All Tecnam directives

Applies to 1 model in our index