AircraftDirectives
MembershipSign inCreate free account
Menu
Airworthiness Directive

AD 2026-07-05 91 FR 16824 Active

Federal Aviation Administration · 14 CFR part 39

Requires repetitive detailed borescope inspections (BSIs) of the exhaust muffler flame tube and, depending on the results, repair of the exhaust muffler flame tube.

Federal Register (opens in a new tab)FAA DRS (opens in a new tab)

FR document
2026-06532
Amendment
39-23300
Published
2026-04-03
Effective
2026-04-20
Models covered
1

Last live check: 2026-08-19

Printed from https://aircraftdirectives.com/ad/2026-07-05 · AircraftDirectives restates official FAA and manufacturer records; the official sources named on this sheet control. Not an airworthiness determination.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.

Opens your browser's print dialog. Choose “Save as PDF” to export a file. Keyboard: Ctrl+P or Cmd+P.

AD

2026-07-05

FR doc 2026-06532 · 91 FR 16824

AD 2026-07-05Published 2026-04-03Effective 2026-04-20

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires repetitive detailed borescope inspections (BSIs) of the exhaust muffler flame tube and, depending on the results, repair of the exhaust muffler flame tube.

Full official abstract

The FAA is adopting a new airworthiness directive (AD) for certain Costruzioni Aeronautiche Tecnam S.P.A. (Tecnam) Model P2010 airplanes. This AD was prompted by a report of unrecoverable loss of engine power. This AD requires repetitive detailed borescope inspections (BSIs) of the exhaust muffler flame tube and, depending on the results, repair of the exhaust muffler flame tube. This AD includes an optional terminating action for the inspection and repair requirements. The FAA is issuing this AD to address the unsafe condition on these products.

More directives for Tecnam

  1. AD 2026-19-06 Airworthiness Directives; Costruzioni Aeronautiche Tecnam S.P.A. Airplan... Effective 2026-10-13
  2. AD 2025-17-13 Airworthiness Directives; Costruzioni Aeronautiche Tecnam S.p.A. Airplan... Effective 2025-09-26
  3. AD 2025-03-09 Airworthiness Directives; Costruzioni Aeronautiche Tecnam S.P.A Airplane... Effective 2025-03-03
  4. AD 2022-19-11 Airworthiness Directives; Costruzioni Aeronautiche Tecnam S.P.A. Airplan... Effective 2022-09-30
  5. AD 2022-12-06 Airworthiness Directives; Costruzioni Aeronautiche Tecnam S.P.A. Airplan... Effective 2022-07-19

All Tecnam directives

View on Federal Register (opens in a new tab) View this AD in FAA DRS (opens in a new tab) Print AD packet (opens the full Federal Register document in a new tab)

Applies to 1 model in our index