Airworthiness Directive

AD 2026-04-11 91 FR 10506 Active

Federal Aviation Administration · 14 CFR part 39

Requires the actions in AD 2024-21-02 and expands the applicability.

FR document
2026-04281
Amendment
39-23271
Published
2026-03-04
Effective
2026-04-08
Model coverage
8 models if a part is installed

Last live check: 2026-11-15

This page is a reference Record, not an airworthiness or compliance determination. Read the full notice.

AD

2026-04-11

FR doc 2026-04281 · 91 FR 10506

AD 2026-04-11Published 2026-03-04Effective 2026-04-08

Supersedes 2024-21-02

Supersedence is read from the Federal Register text of the newer AD — the FAA publishes no structured field for it — and names only ADs held in our index.

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires the actions in AD 2024-21-02 and expands the applicability.

Compliance
Repetitive inspection or action, per the Federal Register abstract. The official rule sets the intervals.
Applies to
Lycoming Engines
Supersedes
2024-21-02
Bulletins it references
SB 630B

This AD cites SB 630B — the actions in that bulletin are required by this AD, the controlling document. Read the bulletin.

Full official abstract

The FAA is superseding Airworthiness Directive (AD) 2024-21- 02, which applies to Lycoming Engines (Lycoming) model engines that have certain connecting rod assemblies installed. AD 2024-21-02 required repetitive oil inspections for bronze metal particulates and, if found, additional inspections of the connecting rod bushings for damage, proper fit, movement, and wear, and replacement if necessary. As terminating action to the connecting rod bushing inspections, AD 2024-21-02 also required replacement of the connecting rod bushings with parts eligible for installation. Since the FAA issued AD 2024-21- 02, the ship date range for potentially affected parts that may be subject to connecting rod failure has been expanded, and additional parts that are eligible for installation have been identified. This AD requires the actions in AD 2024-21-02 and expands the applicability. The FAA is issuing this AD to address the unsafe condition on these products.

Applies if a named part is installed: 8 models in our index

This directive names a part, appliance, propeller or supplemental type certificate rather than these models. It applies to one of them only when the affected item is installed; the official rule says which parts, serial numbers and dates.

Condition: Only with a connecting rod or connecting rod bushing whose part number and ship date (2009 to 2021) are in the AD's Table 1 installed.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.