Airworthiness Directive

AD 98-17-11 63 FR 44545 Active

Federal Aviation Administration · 14 CFR part 39

Requires removal from service of affected crankshafts, or a visual inspection, magnetic particle inspection, and dimensional check of the crankshaft journals, and, if necessary, rework or removal from service of affected…

FR document
98-22240
Amendment
39-10713
Published
1998-08-20
Effective
1998-10-19
Model coverage
13 models if a part is installed

Last live check: 2026-11-15

This page is a reference Record, not an airworthiness or compliance determination. Read the full notice.

AD

98-17-11

FR doc 98-22240 · 63 FR 44545

AD 98-17-11Published 1998-08-20Effective 1998-10-19

FAA rule - 14 CFR 39

FAA rule. Compliance with an applicable AD is required under 14 CFR 39.7. Check its effective date, applicability, compliance times and current status.

Requires removal from service of affected crankshafts, or a visual inspection, magnetic particle inspection, and dimensional check of the crankshaft journals, and, if necessary, rework or removal from service of affected crankshafts and replacement with serviceable parts.

Why this AD
Prompted by reports of crankshafts exhibiting heat check cracking of the nitrided bearing surfaces which led to crankshaft cracking and subsequent failure.
Applies to
Textron Lycoming and Teledyne Continental Motors Reciprocating Engines
Full official abstract

This amendment adopts a new airworthiness directive (AD), applicable to certain Textron Lycoming and Teledyne Continental Motors reciprocating engines that had crankshafts repaired by Nelson Balancing Service, Repair Station Certificate No. NB7R820J, Bedford, Massachusetts, that requires removal from service of affected crankshafts, or a visual inspection, magnetic particle inspection, and dimensional check of the crankshaft journals, and, if necessary, rework or removal from service of affected crankshafts and replacement with serviceable parts. This amendment is prompted by reports of crankshafts exhibiting heat check cracking of the nitrided bearing surfaces which led to crankshaft cracking and subsequent failure. The actions specified by this AD are intended to prevent crankshaft failure due to cracking, which could result in an inflight engine failure and possible forced landing.

Applies if a named part is installed: 13 models in our index

This directive names a part, appliance, propeller or supplemental type certificate rather than these models. It applies to one of them only when the affected item is installed; the official rule says which parts, serial numbers and dates.

Condition: Only with a crankshaft repaired by Nelson Balancing Service (Feb 1995 to Dec 1997); the AD lists the engines by serial number.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.