Lycoming O-435 manufacturer documents

This page is a reference Record, not an airworthiness or compliance determination. Read the full notice.

Records 41–60 of 95, newest issued first: 23 Service Bulletins, 53 Service Instructions and 19 Service Letters in our index.

SLSL 171General Aspects of Spectrometric Oil AnalysisIssued 2017-08-21
SL

SL 171

Lycoming Engines

Issued 2017-08-21

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SISI 1505Cold Weather StartingIssued 2017-08-21
SI

SI 1505

Lycoming Engines

Issued 2017-08-21

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1435Conversion from Constant Speed to Fixed Pitch Propeller and Vice Versa; Propeller Governor Oil Line Nut and ElbowIssued 2017-08-21
SI

SI 1435

Lycoming Engines

Issued 2017-08-21

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Conversion from Constant Speed to Fixed Pitch Propeller and Vice Versa; Propeller Governor Oil Line Nut and Elbow

Applies to Lycoming IO-390Lycoming IO-580Lycoming IO-720Lycoming O-235Lycoming O-320Lycoming O-360Lycoming O-435Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1191ACylinder CompressionIssued 2017-08-21
SI

SI 1191A

Lycoming Engines

Issued 2017-08-21

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1029DTightening Procedures for Crankcase Thru-Studs and BoltsIssued 2017-08-04
SI

SI 1029D

Lycoming Engines

Issued 2017-08-04

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SBSB 632BIdentification of Connecting Rods with Non-Conforming Small End BushingsIssued 2017-08-03
SB

SB 632B

Lycoming Engines

Issued 2017-08-03

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Identification of Connecting Rods with Non-Conforming Small End Bushings

Applies to Lycoming IO-390Lycoming IO-580Lycoming IO-720Lycoming O-235Lycoming O-320Lycoming O-360Lycoming O-435Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1285FNon-Destructive Testing of Lycoming Engine PartsIssued 2017-07-19
SI

SI 1285F

Lycoming Engines

Issued 2017-07-19

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SBSB 480FOil Servicing, Metallic Solids Identification After Oil Servicing, and Associated Corrective ActionIssued 2017-05-25
SB

SB 480F

Lycoming Engines

Issued 2017-05-25

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Oil Servicing, Metallic Solids Identification After Oil Servicing, and Associated Corrective Action

Applies to Lycoming IO-390Lycoming IO-580Lycoming IO-720Lycoming O-235Lycoming O-320Lycoming O-360Lycoming O-435Lycoming O-540

Source: Lycoming Engines, retrieved 2026-08-16 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SBSB 401ARecommended Guidance After a Lightning StrikeIssued 2017-05-24
SB

SB 401A

Lycoming Engines

Issued 2017-05-24

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1425ASuggested Maintenance Procedures to Reduce the Possibility of Valve StickingIssued 2017-05-08
SI

SI 1425A

Lycoming Engines

Issued 2017-05-08

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Suggested Maintenance Procedures to Reduce the Possibility of Valve Sticking

Applies to Lycoming IO-390Lycoming IO-580Lycoming IO-720Lycoming O-235Lycoming O-320Lycoming O-360Lycoming O-435Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SBSB 366CCarburetor Throttle Body Screw InspectionIssued 2016-06-02
SB

SB 366C

Lycoming Engines

Issued 2016-06-02

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Carburetor Throttle Body Screw Inspection

Applies to Lycoming O-235Lycoming O-320Lycoming O-360Lycoming O-435Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SLSL 255AApproved Diaphragm-Type Fuel PumpIssued 2016-05-13
SL

SL 255A

Lycoming Engines

Issued 2016-05-13

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SISI 1301BIdentification of Primer and Fuel Injector LinesIssued 2016-05-13
SI

SI 1301B

Lycoming Engines

Issued 2016-05-13

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1566Lycoming Engines Approves the Use of Safety CableIssued 2016-03-10
SI

SI 1566

Lycoming Engines

Issued 2016-03-10

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SBSB 623Reprint of Hartzell Engine TechnologiesIssued 2016-02-03
SB

SB 623

Lycoming Engines

Issued 2016-02-03

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1059EPre-Lubrication of Parts Before AssemblyIssued 2016-01-27
SI

SI 1059E

Lycoming Engines

Issued 2016-01-27

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1141AReplacement of Worn Starter Ring GearsIssued 2014-05-09
SI

SI 1141A

Lycoming Engines

Issued 2014-05-09

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SLSL 258Part Number Supersedure for External Retaining RingIssued 2013-08-27
SL

SL 258

Lycoming Engines

Issued 2013-08-27

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SLSL 254Lycoming Model Designation for all CarburetorsIssued 2013-04-15
SL

SL 254

Lycoming Engines

Issued 2013-04-15

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SBSB 201FInspection of Crankshaft FlangeIssued 2013-03-26
SB

SB 201F

Lycoming Engines

Issued 2013-03-26

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.