Lycoming O-435 manufacturer documents

This page is a reference Record, not an airworthiness or compliance determination. Read the full notice.

Records 61–80 of 95, newest issued first: 23 Service Bulletins, 53 Service Instructions and 19 Service Letters in our index.

SISI 1546Specific Requirements for Installation and Removal of Electrical Lead on Hartzell Engine Technologies, LLC StartersIssued 2012-10-04
SI

SI 1546

Lycoming Engines

Issued 2012-10-04

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Specific Requirements for Installation and Removal of Electrical Lead on Hartzell Engine Technologies, LLC Starters

Applies to Lycoming IO-390Lycoming IO-580Lycoming IO-720Lycoming O-235Lycoming O-320Lycoming O-360Lycoming O-435Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1549Notification of Approved Fuel Pump Plunger P/N 23D26777Issued 2012-06-27
SI

SI 1549

Lycoming Engines

Issued 2012-06-27

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1256FValve Guides For Service UseIssued 2012-04-05
SI

SI 1256F

Lycoming Engines

Issued 2012-04-05

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1458GConnecting Rod BoltsIssued 2012-03-06
SI

SI 1458G

Lycoming Engines

Issued 2012-03-06

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1543Notification of Approved Tappet P/N 15B26262Issued 2012-02-23
SI

SI 1543

Lycoming Engines

Issued 2012-02-23

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1535Counterweight and Roller Removal, Inspection, and InstallationIssued 2011-10-31
SI

SI 1535

Lycoming Engines

Issued 2011-10-31

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SLSL 220CWide Deck Cylinder Configuration on Lycoming EnginesIssued 2011-08-02
SL

SL 220C

Lycoming Engines

Issued 2011-08-02

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SLSL 250ALycoming Engines Exchange Engine Core PolicyIssued 2011-07-29
SL

SL 250A

Lycoming Engines

Issued 2011-07-29

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SBSB 595Torque Values for Screws that Attach Ignition Harness Attachment PlateIssued 2011-05-06
SB

SB 595

Lycoming Engines

Issued 2011-05-06

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Torque Values for Screws that Attach Ignition Harness Attachment Plate

Applies to Lycoming IO-390Lycoming IO-580Lycoming IO-720Lycoming O-235Lycoming O-320Lycoming O-360Lycoming O-435Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1484CInstallation Torque for Fuel Metering Device, Carburetor, Fuel Injector Servo or "AN" Fuel Pump Hold Down NutsIssued 2011-03-29
SI

SI 1484C

Lycoming Engines

Issued 2011-03-29

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Installation Torque for Fuel Metering Device, Carburetor, Fuel Injector Servo or "AN" Fuel Pump Hold Down Nuts

Applies to Lycoming IO-390Lycoming IO-580Lycoming IO-720Lycoming O-235Lycoming O-320Lycoming O-360Lycoming O-435Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1530Engine Inspection in Particulate-Laden EnvironmentsIssued 2011-02-04
SI

SI 1530

Lycoming Engines

Issued 2011-02-04

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SISI 1534Service Recommendations for Long-Term Storage of Engines That Use Automotive FuelIssued 2011-01-27
SI

SI 1534

Lycoming Engines

Issued 2011-01-27

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Service Recommendations for Long-Term Storage of Engines That Use Automotive Fuel

Applies to Lycoming IO-390Lycoming IO-580Lycoming IO-720Lycoming O-235Lycoming O-320Lycoming O-360Lycoming O-435Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SISI 1427CLycoming Reciprocating Engine Break-In and Oil ConsumptionIssued 2010-12-29
SI

SI 1427C

Lycoming Engines

Issued 2010-12-29

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SISI 1483AValve Leak Check with Engine Cylinder RemovedIssued 2010-12-21
SI

SI 1483A

Lycoming Engines

Issued 2010-12-21

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SLSL 251Connecting Rod Bolt MarkingIssued 2010-11-23
SL

SL 251

Lycoming Engines

Issued 2010-11-23

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SBSB 398BRecommended Corrective Action for Use of Incorrect FuelIssued 2010-11-22
SB

SB 398B

Lycoming Engines

Issued 2010-11-22

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SBSB 592Engine Inspection after OverboostIssued 2010-09-29
SB

SB 592

Lycoming Engines

Issued 2010-09-29

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-15: web page.

SISI 1132BMagneto Drop-OffIssued 2010-06-18
SI

SI 1132B

Lycoming Engines

Issued 2010-06-18

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SISI 1528Aircraft Engine Starter RecommendationsIssued 2009-12-15
SI

SI 1528

Lycoming Engines

Issued 2009-12-15

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

SISI 1424AInstallation Procedure for P/N 15B26066 Hydraulic Tappet/Plunger AssembliesIssued 2009-12-15
SI

SI 1424A

Lycoming Engines

Issued 2009-12-15

Manufacturer document

Manufacturer document; legal obligations depend on applicable requirements.

Installation Procedure for P/N 15B26066 Hydraulic Tappet/Plunger Assemblies

Applies to Lycoming IO-390Lycoming IO-580Lycoming IO-720Lycoming O-320Lycoming O-360Lycoming O-435Lycoming O-540

Source: Lycoming Engines, retrieved 2026-09-01 · manufacturer page (opens in a new tab)

Manufacturer document checked 2026-11-13: web page.

This page is a reference Record, not an airworthiness or compliance determination. Official FAA and manufacturer sources control over our restatement, subject to governing law. Check applicability, current requirements and incorporated documents before acting. The owner or operator remains responsible for airworthiness and required records under 14 CFR 91.403 and 91.417, as applicable. Terms of Use: /terms.