Piper PA-24 Comanche

Airworthiness Directives; Piper Aircraft, Inc. Airplanes

We are adopting a new airworthiness directive (AD) for certain Piper Aircraft, Inc. Models PA-23-250, PA-24-250, PA-24-260, PA-24-400, PA-30, PA-31, PA-31-300, PA-31P, PA-39, and PA-E23-250 airplanes. This AD was prompted by an accident caused by fuel starvation where the shape of the wing fuel tanks and fuel below a certain level in that tank may have allowed the fuel to move away from the tank outlet during certain maneuvers. This AD requires installing a fuel system management placard on the airplane instrument panel and adding text to the Limitations Section of the pilot's operating handbook (POH)/airplane flight manual (AFM). We are issuing this AD to correct the unsafe condition on these products.

Airworthiness Directives; Piper Aircraft, Inc. Airplanes

We are adopting a new airworthiness directive (AD) for certain Piper Aircraft, Inc. Models PA-24, PA-24-250, and PA-24-260 airplanes. This AD was prompted by reports of cracks developing in the stabilator horn assembly. This AD requires replacement of the stabilator horn assembly and/or repetitive inspections of the stabilator horn assembly for corrosion or cracks, as applicable. Corrosion or cracks could lead to failure of the stabilator horn. Consequently, failure of the stabilator horn could lead to a loss of pitch control in flight. We are issuing this AD to correct the unsafe condition on these products.

Airworthiness Directives; The New Piper Aircraft, Inc. PA-23, PA- 24, PA-28, PA-32, and PA-34 Series Airplanes

This amendment adopts a new airworthiness directive (AD) that applies to certain The New Piper Aircraft, Inc. (Piper) PA-23, PA-24, PA-28, PA-32, and PA-34 series airplanes that incorporate certain Facet (manufactured by the Purolator Products Company) induction air filters. This AD requires replacing these induction air filters. This AD results from reports of cracking, splitting, crumbling, and deterioration (referred to as damage hereon) of Facet/Purolator induction air filters manufactured between a certain time period. The actions specified by this AD are intended to prevent pieces of a damaged induction air filter from being ingested into the engine, which could result in reduced or loss of engine power.

Airworthiness Directives; The New Piper Aircraft, Inc. PA-24, PA- 28R, PA-30, PA-32R, PA-34, and PA-39 Series Airplanes

This amendment revises AirworthinessDirective (AD) 97-01-01, which currently requires repetitively inspecting the main gear sidebrace studs for cracks on The New Piper Aircraft, Inc. (Piper)Models PA-24, PA-28R, PA-30, PA-32R, PA-34, and PA-39 series airplanes, and replacing any main gear sidebrace stud found cracked. The Federal Aviation Administration (FAA) has approved certain alternative methods of compliance (AMOC) for AD 97-01-01, and has determined that these AMOC's should be incorporated into the AD. This AD will retain all the actions of AD 97-01-01, and will incorporate certain AMOC's as a way of accomplishing the actions specified in AD 97-01-01. The actions specified by this AD are intended to prevent a main landing gear collapse caused by main gear sidebrace stud cracks, which could result in loss of control of the airplane during landing operations.

Airworthiness Directives; The New Piper Aircraft, Inc. PA24, PA28R, PA30, PA32R, PA34, and PA39 Series Airplanes

This amendment adopts a new airworthiness directive (AD) that supersedes AD 95-20-07, which currently requires repetitively inspecting the main gear sidebrace studs for cracks on certain The New Piper Aircraft, Inc. (Piper) PA24, PA28R, PA30, PA32R, PA34, and PA39 series airplanes, and replacing any cracked main gear sidebrace stud. This AD retains the repetitive inspection and possible replacement requirements of AD 95-20-07; specifies in the ``Applicability'' section of the AD that certain Model PA34-200T airplanes could contain a certain main gear sidebrace assembly configuration that is not affected; and incorporates additional modification and replacement options. This AD results from additional information received by the Federal Aviation Administration (FAA) after the issuance of AD 95-20-07 on the design and service history of the affected airplanes concerning this subject. The actions specified by this AD are intended to prevent a main landing gear collapse caused by main gear sidebrace stud cracks, which could result in loss of control of the airplane during landing operations.